Servo Motors, Power Supplies & Legacy Products

 

High-performance Panasonic brushless servo motors ranging from 30W to 750W and featuring super low inertia, high-efficiency, low cogging, IP65 enclosure rating, 2500 lpr optical encoders. All motors are seamlessly controlled by Logosol's amplifiers and intelligent servo drives for distributed automation.

 
Model Output Rated
current		 Max
current		 Rated
torque		 Max
torque		 Rated
speed		 Max
speed		 Voltage
constant		 Torque
constant
Units W A A N-m lb-in N-m lb-in rpm rpm V/Krpm N-m/A
MUMS3AZA1EOS 30 1.0 4.3 0.095 0.84 0.28 2.48 3000 5000 7.7 0.073
MUMS5AZA1EOS 50 1.0 4.3 0.1 0.89 0.48 4.25 3000 5000 12.0 0.110
MUMS011A1EOS 100 1.6 6.9 0.32 2.83 0.95 8.41 3000 5000 15.6 0.150
MUMS021A1EOS 200 2.5 10.5 0.64 5.66 1.91 16.90 3000 5000 20.0 0.190
MUMS041A1EOS 400 4.4 18.6 1.30 11.51 3.80 33.63 3000 4500 22.5 0.210
MUMS081A1EOS 750 7.6 32.0 2.40 21.24 7.10 62.84 3000 4500 25.6 0.240

 

Complete 250W power supply solution for most single and multi axis applications. They provide two unregulated power sources, specially designed to be used with Logosol motion control components and other related devices. The power supplies are emergency stop controlled devices, which provides high safety level for all components connected to its MOTOR POWER source. For high peak stability the MOTOR POWER supply includes large internal capacitance.

 
Power supply for Logosol's intelligent drives, servo amplifiers, stand alone controllers and user devices 115 V AC or 230 V AC 50/60 Hz operation with standard IEC power input

Two independent power sources:

  • I/O power - 24 V / 1 A

  • MOTOR power
  • LS-1024 - 24 V / 10 A
  • LS-548   - 48 V / 5 A
  • LS-460   - 60 V / 4 A
  • LS-2120 - 120 V / 2 A
3 KV primary to secondary isolation Three terminals per output
All outputs are fused Optional shunt regulator

 

Complete 600W power supply solution for most single and multi axis applications. They provide two unregulated power sources, specially designed to be used with Logosol motion control components and other related devices. The power supplies are emergency stop controlled devices, which provides high safety level for all components connected to its MOTOR POWER source. For high peak stability the MOTOR POWER supply includes large internal capacitance.

 
Power supply for Logosol's intelligent drives, servo amplifiers, stand alone controllers and user devices 115 V AC or 230 V AC 50/60 Hz operation with standard IEC power input

Two independent power sources:

  • I/O power - 24 V / 2.5 A

  • MOTOR power
  • LS-2324 - 24 V / 23 A
  • LS-1148 - 48 V / 11 A
  • LS-1060 - 60 V / 10 A
  • LS-872   - 72 V / 8 A
  • LS-696   - 96 V / 6 A
  • LS-5120 - 120 V / 5 A
3 KV primary to secondary isolation Two terminal screws per output
Emergency stop dependent MOTOR power All outputs are fused
Emergency stop activated output Optional shunt regulator

LS-x12 is a multi-axis, stand-alone servo controller with ±10V analog output. In addition to the motion control, LS-x12 offers general-purpose digital I/O lines. LS-x12 communicates with the host computer through RS-232C serial port. A second, full duplex RS-485 port is available, allowing LS-x12 to serve as a master for network of Logosol intelligent servo drives. The controller may run in stand-alone mode, or the host may control the target device using a simple but powerful set of commands. The built-in 386 CPU features enough computing power and memory to implement even most sophisticated motion control. LS-x12 is equipped with various safety features like short circuit protection for the digital outputs, emergency stop input and encoder control. No special skills are required to program LS-x12 servo controller. Logosol Motion Control Center includes terminal emulation, sophisticated diagnostic and optimizing tools. Drag-and-drop style of Motion Composer utility offers a user-friendly environment for rapid application development, eliminating the need of low-level programming.
Single 24V DC power supply

Up to 6 axes
12-bit ±10V analog output PC-104 bus
One RS-232 and one RS-485 ports 7 general purpose inputs 5mA/24V
5 general purpose open collector outputs 50mA/24V Optional analog input with 8-bit ADC
Emergency stop and fault inputs Bernstein-Bezier S-curve profile generator

LS-151 is a single axis, stand-alone servo controller with integrated amplifier for applications using brushless (AC) or brush (DC) type motors up to 1 HP. No jumpers or setup is required to switch between both types of motors. Trapezoidal brushless motor commutation is performed automatically if hall sensors are connected to the controller. In addition to the motion control, LS-151 offers general-purpose digital I/O lines. LS-151 communicates with the host computer through RS-232C serial port. The controller may run in stand-alone mode after downloading a program into its user memory, or the host may control the target device using a simple but powerful set of commands. The onboard 386 CPU features enough computing power and memory to implement even most sophisticated motion control. LS-151 is equipped with various safety features like short circuit protection for the motor and digital outputs, overtravel limit switch inputs, emergency stop input, control for the presence of the encoder and I/O connectors, over and undervoltage protection. The maximum motor output current may be limited. The limit is under software control and may be changed on the fly. No special skills are required to program LS-151 servo drive. Logosol Motion Control Center includes terminal emulation, sophisticated diagnostic and optimizing tools. Drag-and-drop style of Motion Composer utility offers a user-friendly environment for rapid application development, eliminating the need of low-level programming.
Supports brush-commutated (DC) and
brushless 60/120° commutated (AC) motors		 18 to 31V DC operating power supply
18 to 91V DC motor power supply
12A peak, 8A continuous output current PC-104 bus
Two RS-232 ports 7 general purpose inputs 8mA/24V
5 general purpose open collector outputs 1A/24V Programmable motor current limit
Emergency stop and forward and reverse limit inputs Bernstein-Bezier S-curve profile generator

LS-421 is a 4-axis multipurpose servo controller with built-in power amplifiers for DC motors with quadrature incremental encoders. It is designed to meet the requirements for high precision and high reliability essential to industrial applications. The board is designed as a plug-in board for PC/AT compatible computers with ISA bus. The unique FlexWare™ design allows flexible wiring and pin assignment to meet specific requirements and to achieve compatibility with the existing hardware. To attain higher reliability of operation in industrial environments, all inputs and outputs are optoisolated from the computer ground.
4 servo controlled motion axes

Modular design
Bus interface: ISA DSP technology based on PMD MC 1401A chip
10-bit PWM @ 25KHz S-curve velocity profile
Programmable output current limit / shutdown Quadrature incremental encoder interface
Multi-turn absolute position encoder interface Emergency stop input
Additional general purpose optoisolated inputs and outputs Flexible wiring

LS-221BL is a 2-axis sinusoidal servo controller with built-in power amplifiers for brushless commutated motors with quadrature incremental encoders. It is designed to meet the requirements for high precision and high reliability essential to industrial applications. The board is designed as a plug-in board for PC/AT compatible computers with ISA bus. The unique FlexWare™ design allows flexible wiring and pin assignment to meet specific requirements and to achieve compatibility with the existing hardware. To attain higher reliability of operation in industrial environments, all inputs and outputs are optoisolated from the computer ground.
2 servo controlled motion axes

Modular design
Bus interface: ISA DSP technology based on PMD MC 1231A chip
Sinusoidal commutation S-curve velocity profile
Programmable output current limit / shutdown Quadrature incremental encoder interface
Multi-turn absolute position encoder interface Emergency stop input
Additional general purpose optoisolated inputs and outputs Flexible wiring

 

Industrial chassis designed to utilize the products for distributed control in a centralized fashion. This platform allows building cost-effective heterogeneous motion control systems consisting of servo, stepper, spindle, I/O and joystick modules. The chassis are equipped with motor and logic power supplies, safety circuitries, cooling fans and multiple connectivity options. Available in stand-alone or slave controller configurations for CNC, robotic, metrology, biomedical and other demanding applications.

 

Up to 6 servo controllers Coordinated motion control
High-speed synchronous 3-phase spindle motor controller Digital and analog inputs and outputs
Stand-alone or PC controlled modes Hand-held terminal interface
2- or 3-axes joystick for manual jogging Hardware watchdog
60 V DC, 600W or 1200W motor power supply 24 VDC operating power supply
Logosol distributed control network (LDCN) interface Communication speed from 19.2 to 115.2 Kbps
Command rate up to 1000/sec Dimensions 12.5" x 13.5" x 6.5"

 

Variety of industrial grade chassis with built-in computer and motor power supplies to host a complete PC-based servo control system including CPU board, digital I/O cards, flash disk, custom-built plug-ins etc. The full-size 19" rack-mount chassis supports from 1 to 6 LS-421 or similar servo boards with integrated power amplifiers (up to 24 axes).

Chassis

  • Full size 19" rack mount chassis (17" x 7.0" x 17.5" )

  • Half size 10.5" rack mount chassis (9.25" x 7.0" x 17.2")

  • Compact chassis (6.25" x 6.76" x 17.2")

  • Mini Chassis (3.9" x 5.7" x 15.6")

Servo boards per chassis

  • 1 to 6  (up to 24 axes)

  • 1 to 3 (up to 12 axes)

  • 1 (up to 4 axis)

  • 1 (up to 4 axis)
200W to 2000W motor power supply 65W to 250W computer power supply
Copyright © 2010 Logosol, Inc. All rights reserved.